Autowatch Ghost Installers Nottingham
Everyday, more vehicles are taken with the owner's keys. Cloning equipment and door lock pick sets are easily available on the internet allowing thieves to clone your key remote and start your vehicle in as little as 20-30 minutes.
Autowatch Ghost immobiliser blocks these methods by preventing the ignition of your vehicle in the event that a unique PIN code is entered. It is silent, discrete and does not use LED indicators to make it untraceable by criminals.
Discipline & Silence
Key cloning online is a popular tool used by thieves to steal cars without the owner's key. Our Autowatch ghost 2 immobiliser installation immobiliser prevents this theft by stopping your vehicle from starting until you enter your unique personalised codes, which can be entered using buttons on the dashboard or steering wheel.
When the Ghost is activated by entering your personal pin code, it will shut down all of the vehicles electronics and stop the engine from running. It is designed to be discrete & silent, meaning that it does not trigger any alarm sensors within the vehicle, and no LED indicators are displayed. This makes it virtually impossible to detect using scanners that are used to detect vehicle theft. Our installation technicians are TASSA registered, DBS security checked, and system-trained technicians. They will install the Ghost for you in a covert way, leaving no proof that it was ever fitted.
Our Ghost 2 device can also be used as a tracker. It transmits GPS signals to your phone, allowing you to view the vehicle's movements as well as locate it on the map. This allows you to keep track of the location of your car whilst it is in the garage for repairs or service.
You can turn the application off and on within the app. This gives you complete control over your car's security. The Autowatch Ghost app can also be used to enable a 'Service Mode' for your vehicle that allows you to leave the car without having to go through the disarming sequence for the button or even be in the vehicle. This is especially useful for those who have to drop the car off at a garage nearby to have a repair or service.
This application makes it simple to secure your Ghost-II with the use of your mobile phone. When you enter the vehicle's range, your Ghost-II is immediately disarmed. This feature can be enabled even when your phone is in the sleep mode in your pocket.
Simple to operate
The autowatch ghost installation Ghost immobiliser works silently to stop vehicle thieves from copying your key fob or hacking the system. The device is plugged directly into the vehicle's CAN Data Network. It only allows the vehicle to start after a PIN number is entered using the original buttons on your vehicle. This can be entered by the user from a hidden place or via your phone app. Autowatch Ghost is installed under the dash or steering wheel by TTW and only you will know it's there. It's also weatherproof and so small that it's virtually undetectable by criminals in cars seeking circuit breakers or the distinctive clicking sound of a traditional immobiliser relay.
With the availability of low-cost door lock cloning tools and pick sets, thieves are now able to attack nearly any modern vehicle without the owner's keys. The Autowatch Ghost immobiliser blocks this and can be ported to another vehicle, provided that the vehicle is compatible.
The device is installed by a certified technician in the location of his choice and then concealed so that it is inaccessible to thieves even when the engine is running. The Ghost doesn't emit radio frequency signals, which means it's impossible for an armed criminal using RF scanning or code-grabbing technology to find the device.
The ghost installers near me can be set to Service/Valet Mode, so that you don't have to worry about the technician knowing your pin code when your vehicle is taken to a garage for service. The Ghost can do this because it uses the original buttons on your vehicle, so no extra wiring is required.
The Autowatch Ghost has also been TASSA Verified, which means it is acknowledged by a number of insurance companies as a security measure. It is a good idea to contact your insurance company prior to installing the ghost Installer immobiliser fitted. This way you can get a good deal on your policy and make sure your vehicle is secure against an expensive theft claim.
No Radio Frequency Signals
Autowatch Ghost is the only system to stop theft of vehicles through modern day key cloning. If your vehicle is in a bodyshop, garage or dealership and someone inside copies the original key fob and the Ghost immobiliser still cuts out the engine since only you can enter the unique pin code to start the car. If the device is compromised, our TASSA-approved installers will show how to become a autowatch ghost installer to change the pin code.
The Ghost doesn't transmit radio frequency signals, like other systems like trackers. This means that thieves can't identify it using code grabbers or RF scanners. This feature in conjunction with the quiet and discrete operation makes this a quiet yet effective solution.
A simple smart-phone app is available for the iPhone to connect with the Ghost-II. When you are ready to use your vehicle, simply enable the app and it will disarm the Ghost-II when you approach it. It is safe to drive the vehicle, since your phone will automatically arm once you are away.
This is a very neat and easy method to make security accessible whenever you need to drive your vehicle. This app is available for free from the iPhone App Store.
The Ghost-II is not like the original Autowatch Ghost as it does not have LED indicators. This means that thieves cannot detect it until they are close enough to the vehicle to open a door and then turn on the light.
The Autowatch Ghost-II also features a power cut disconnect feature, this will shut the engine of your vehicle and power to the ignition when the system is activated. This is a fantastic security feature to protect your vehicle when you are on a long trip or have left the keys in the ignition. This is a fantastic security feature for business and family users who must park in public areas or for people who work on the road.
No LED Indicators
The ghost install is connected to the vehicle's CAN Data system. A personal PIN is entered through the steering wheel or dash board and allows the device be activated. It does not use LED indicators, which makes it inaccessible to scanners used for vehicle theft and completely silent to operate. It can also be transferred from one vehicle to another, assuming that the new vehicle is compatible in the first place and that technological advances in the last few years haven't made it obsolete later on. Holbon UK Ltd install and hand over the Ghost immobiliser, along with the owner's manual and a certificate of authenticity.
Everyday, more vehicles are taken with the owner's keys. Cloning equipment and door lock pick sets are easily available on the internet allowing thieves to clone your key remote and start your vehicle in as little as 20-30 minutes.
Autowatch Ghost immobiliser blocks these methods by preventing the ignition of your vehicle in the event that a unique PIN code is entered. It is silent, discrete and does not use LED indicators to make it untraceable by criminals.
Discipline & Silence
Key cloning online is a popular tool used by thieves to steal cars without the owner's key. Our Autowatch ghost 2 immobiliser installation immobiliser prevents this theft by stopping your vehicle from starting until you enter your unique personalised codes, which can be entered using buttons on the dashboard or steering wheel.
When the Ghost is activated by entering your personal pin code, it will shut down all of the vehicles electronics and stop the engine from running. It is designed to be discrete & silent, meaning that it does not trigger any alarm sensors within the vehicle, and no LED indicators are displayed. This makes it virtually impossible to detect using scanners that are used to detect vehicle theft. Our installation technicians are TASSA registered, DBS security checked, and system-trained technicians. They will install the Ghost for you in a covert way, leaving no proof that it was ever fitted.
Our Ghost 2 device can also be used as a tracker. It transmits GPS signals to your phone, allowing you to view the vehicle's movements as well as locate it on the map. This allows you to keep track of the location of your car whilst it is in the garage for repairs or service.
You can turn the application off and on within the app. This gives you complete control over your car's security. The Autowatch Ghost app can also be used to enable a 'Service Mode' for your vehicle that allows you to leave the car without having to go through the disarming sequence for the button or even be in the vehicle. This is especially useful for those who have to drop the car off at a garage nearby to have a repair or service.
This application makes it simple to secure your Ghost-II with the use of your mobile phone. When you enter the vehicle's range, your Ghost-II is immediately disarmed. This feature can be enabled even when your phone is in the sleep mode in your pocket.Simple to operate
The autowatch ghost installation Ghost immobiliser works silently to stop vehicle thieves from copying your key fob or hacking the system. The device is plugged directly into the vehicle's CAN Data Network. It only allows the vehicle to start after a PIN number is entered using the original buttons on your vehicle. This can be entered by the user from a hidden place or via your phone app. Autowatch Ghost is installed under the dash or steering wheel by TTW and only you will know it's there. It's also weatherproof and so small that it's virtually undetectable by criminals in cars seeking circuit breakers or the distinctive clicking sound of a traditional immobiliser relay.
With the availability of low-cost door lock cloning tools and pick sets, thieves are now able to attack nearly any modern vehicle without the owner's keys. The Autowatch Ghost immobiliser blocks this and can be ported to another vehicle, provided that the vehicle is compatible.
The device is installed by a certified technician in the location of his choice and then concealed so that it is inaccessible to thieves even when the engine is running. The Ghost doesn't emit radio frequency signals, which means it's impossible for an armed criminal using RF scanning or code-grabbing technology to find the device.
The ghost installers near me can be set to Service/Valet Mode, so that you don't have to worry about the technician knowing your pin code when your vehicle is taken to a garage for service. The Ghost can do this because it uses the original buttons on your vehicle, so no extra wiring is required.
The Autowatch Ghost has also been TASSA Verified, which means it is acknowledged by a number of insurance companies as a security measure. It is a good idea to contact your insurance company prior to installing the ghost Installer immobiliser fitted. This way you can get a good deal on your policy and make sure your vehicle is secure against an expensive theft claim.
No Radio Frequency Signals
Autowatch Ghost is the only system to stop theft of vehicles through modern day key cloning. If your vehicle is in a bodyshop, garage or dealership and someone inside copies the original key fob and the Ghost immobiliser still cuts out the engine since only you can enter the unique pin code to start the car. If the device is compromised, our TASSA-approved installers will show how to become a autowatch ghost installer to change the pin code.
The Ghost doesn't transmit radio frequency signals, like other systems like trackers. This means that thieves can't identify it using code grabbers or RF scanners. This feature in conjunction with the quiet and discrete operation makes this a quiet yet effective solution.
A simple smart-phone app is available for the iPhone to connect with the Ghost-II. When you are ready to use your vehicle, simply enable the app and it will disarm the Ghost-II when you approach it. It is safe to drive the vehicle, since your phone will automatically arm once you are away.
This is a very neat and easy method to make security accessible whenever you need to drive your vehicle. This app is available for free from the iPhone App Store.
The Ghost-II is not like the original Autowatch Ghost as it does not have LED indicators. This means that thieves cannot detect it until they are close enough to the vehicle to open a door and then turn on the light.
The Autowatch Ghost-II also features a power cut disconnect feature, this will shut the engine of your vehicle and power to the ignition when the system is activated. This is a fantastic security feature to protect your vehicle when you are on a long trip or have left the keys in the ignition. This is a fantastic security feature for business and family users who must park in public areas or for people who work on the road.
No LED Indicators
The ghost install is connected to the vehicle's CAN Data system. A personal PIN is entered through the steering wheel or dash board and allows the device be activated. It does not use LED indicators, which makes it inaccessible to scanners used for vehicle theft and completely silent to operate. It can also be transferred from one vehicle to another, assuming that the new vehicle is compatible in the first place and that technological advances in the last few years haven't made it obsolete later on. Holbon UK Ltd install and hand over the Ghost immobiliser, along with the owner's manual and a certificate of authenticity.
