Choosing Upvc Window Replacement Hinges
It's not as difficult as it might appear to select and install upvc replacement hinges. It is important to check the arrows on the hinges is facing in the correct direction and the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.
There are several different types of hinges, each with its distinctive characteristics. This article will focus on the most commonly used types of uPVC window hinges and their advantages.
Egress/Easy Clean Hinge
They are a great option to replace or upgrade the fire escape safety window hinges repair, as they open at a full 90-degree angle. They can be removed to a 'easy-clean' position which allows you to get access to the outside of windows without having to climb ladders or lean at risky angles.
These egress hinges are heavy-duty and are made by Yale which is among the most well-known and reliable home security brands available today. They are suitable for all types of uPVC side-hung windows. By pressing a small button, the window sash will be moved to the side and into the position that is easy to clean. After closing, the sash will automatically reset to its original position.
Both 13mm and 17mm sizes are available. Use our Egress Selection Guide to help you select the best product for your window.
The hinges are designed to be used with a standard side-hung frame, either uPVC or aluminium. The friction screw is used to adjust the resistance. This makes opening the window easier and reduces the chances of a mistaken closing in severe winds. They have been cycle tested to over 30000 cycles and are in compliance with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.
With no buttons or catches the Nico Egress Easy Clean Friction Hinge is easy to use and offers a practical solution for emergency egress and safe cleaning. First, open the window to the egress (full opening) position, then press the hinge retaining clip that is located on the inside of the bottom corner. This will release both the top and bottom catches allowing you slide the sash to the clean position. Once in the easy-clean position, close the window to reset the hinges to their egress positions.
Fire-Escape Hinge
Fire Escape Hinges (also known as "Easy Clean") are used to replace windows with side openings to ensure fire safety. These types of hinges open more wide and faster than standard hinges to allow an open space to escape in the event of an emergency fire. This type of hinge is legal in any living space that has windows, as stipulated by building regulations.
The windows have a friction stay that allows them to open to 90 degrees. They also allow the opening sash slide across the glass when opened, allowing for easy cleaning without the need to climb ladders. The hinges do not have buttons or catches, and are operated with a simple, secure lever that is accessible from the inside of the home.
The hinges, which are manufactured in the UK by Cotswold are fitted with a child safety feature for daily use. It can be reverted using an invisible button. You'll have peace of assurance that your children won't accidentally open the windows too far. The stack heights are 13mm or 17mm.
Measure the length of the current side-hung window hinge that is attached to the frame. (See the article on measuring the length of upvc window hinge replacement near me hinges). Select the correct size hinge from the list below.
It is important to note that this measurement is taken at the hinge's point that is attached to the frame and not the sash. The actual hinge length can be longer or shorter dependent on how much does it cost to replace window hinges the old windows were manufactured. Also, when selecting the width of your hinge the majority of upvc windows can be fitted with a 13mm stack height. However, should your window frame has 17mm, then select the option for this. You can also install the 4mm packer to make up for the difference. All the hinges are supplied handed (1 left and one right). Screws are not included with the hinges. If required, these screws can be purchased separately. Our casement window hinge replacement repair screws made of upvc are highly recommended. These screws are designed to enhance your hinges' performance and allow them to operate efficiently for a longer. They have a lower friction design, and an improved weather seal, with a brand new nylon reducer end cap.
Restricted Hinge
There are times when a window needs to open fully and this can be a challenge with a standard hinge. The restricted child safety friction hinges help to overcome this problem and provide a solution when ventilation is needed but access for cleaning or escape in case of fire is not feasible. They restrict the amount of opening the sash and permit the override of this restriction by pressing a button. They are available in 13mm or 17mm stack heights and are suitable for both top and side hung windows.
The Nico Restricted Egress Friction Hinges combine the features of both a standard restrictor and a pivot for fire escape to offer a simple and effective way to comply with building regulations. It is suitable for side-hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is supplied as a pair of hinges where one hinge is restricted egress and the other free, allowing one to be placed at the lower part of the sash, while the other hinge is installed to the top.
These uPVC restrictive hinges have been tested to BS6375 part 2. They are intended to be used on windows that cannot be fully opened like a small children's bedroom. The mechanism restricts the amount the sash can open up to the safety level of 100mm and re-engages once the window is closed.
Like the other types of uPVC friction hinges that are available, these hinges can be used on all types of windows and are suitable for difficult to access windows above the ground three-storey flats and those that typically require a ladder to access them. They can be combined with our selection of security enhancements such as hinge guard protection plates or dog bolts for PAS 24 performance.
It is crucial to take measurements of the hinge on your current window hinges uk to ensure that you get replacements of the same size. This can be done by looking through the image gallery of the hinge before deciding where you would like it to be. Top-hung hinges are limited on both sides and the side hung hinges are restricted only on one side.
Standard Hinge
A standard hinge is made of metal-to-metal contact and no extra parts to reduce friction. It is available in a variety of finishes, and is fire-rated. To determine the radius of your hinge put it on its flat surface and then line up with a quarter and dime in two corners. If the dime is more snug than the quarter, the corner is rounded by 1/4 inch; if the quarter fit better, it's rounded by 5/8 inch.
Selecting the right hinge can be the difference between making or breaking your door's appearance. It's important to match the style and finish of your door to the hinges to create a seamless appearance that is both functional and visually attractive.
It's not as difficult as it might appear to select and install upvc replacement hinges. It is important to check the arrows on the hinges is facing in the correct direction and the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.
There are several different types of hinges, each with its distinctive characteristics. This article will focus on the most commonly used types of uPVC window hinges and their advantages.
Egress/Easy Clean HingeThey are a great option to replace or upgrade the fire escape safety window hinges repair, as they open at a full 90-degree angle. They can be removed to a 'easy-clean' position which allows you to get access to the outside of windows without having to climb ladders or lean at risky angles.
These egress hinges are heavy-duty and are made by Yale which is among the most well-known and reliable home security brands available today. They are suitable for all types of uPVC side-hung windows. By pressing a small button, the window sash will be moved to the side and into the position that is easy to clean. After closing, the sash will automatically reset to its original position.
Both 13mm and 17mm sizes are available. Use our Egress Selection Guide to help you select the best product for your window.
The hinges are designed to be used with a standard side-hung frame, either uPVC or aluminium. The friction screw is used to adjust the resistance. This makes opening the window easier and reduces the chances of a mistaken closing in severe winds. They have been cycle tested to over 30000 cycles and are in compliance with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.
With no buttons or catches the Nico Egress Easy Clean Friction Hinge is easy to use and offers a practical solution for emergency egress and safe cleaning. First, open the window to the egress (full opening) position, then press the hinge retaining clip that is located on the inside of the bottom corner. This will release both the top and bottom catches allowing you slide the sash to the clean position. Once in the easy-clean position, close the window to reset the hinges to their egress positions.
Fire-Escape Hinge
Fire Escape Hinges (also known as "Easy Clean") are used to replace windows with side openings to ensure fire safety. These types of hinges open more wide and faster than standard hinges to allow an open space to escape in the event of an emergency fire. This type of hinge is legal in any living space that has windows, as stipulated by building regulations.
The windows have a friction stay that allows them to open to 90 degrees. They also allow the opening sash slide across the glass when opened, allowing for easy cleaning without the need to climb ladders. The hinges do not have buttons or catches, and are operated with a simple, secure lever that is accessible from the inside of the home.The hinges, which are manufactured in the UK by Cotswold are fitted with a child safety feature for daily use. It can be reverted using an invisible button. You'll have peace of assurance that your children won't accidentally open the windows too far. The stack heights are 13mm or 17mm.
Measure the length of the current side-hung window hinge that is attached to the frame. (See the article on measuring the length of upvc window hinge replacement near me hinges). Select the correct size hinge from the list below.
It is important to note that this measurement is taken at the hinge's point that is attached to the frame and not the sash. The actual hinge length can be longer or shorter dependent on how much does it cost to replace window hinges the old windows were manufactured. Also, when selecting the width of your hinge the majority of upvc windows can be fitted with a 13mm stack height. However, should your window frame has 17mm, then select the option for this. You can also install the 4mm packer to make up for the difference. All the hinges are supplied handed (1 left and one right). Screws are not included with the hinges. If required, these screws can be purchased separately. Our casement window hinge replacement repair screws made of upvc are highly recommended. These screws are designed to enhance your hinges' performance and allow them to operate efficiently for a longer. They have a lower friction design, and an improved weather seal, with a brand new nylon reducer end cap.
Restricted Hinge
There are times when a window needs to open fully and this can be a challenge with a standard hinge. The restricted child safety friction hinges help to overcome this problem and provide a solution when ventilation is needed but access for cleaning or escape in case of fire is not feasible. They restrict the amount of opening the sash and permit the override of this restriction by pressing a button. They are available in 13mm or 17mm stack heights and are suitable for both top and side hung windows.
The Nico Restricted Egress Friction Hinges combine the features of both a standard restrictor and a pivot for fire escape to offer a simple and effective way to comply with building regulations. It is suitable for side-hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is supplied as a pair of hinges where one hinge is restricted egress and the other free, allowing one to be placed at the lower part of the sash, while the other hinge is installed to the top.
These uPVC restrictive hinges have been tested to BS6375 part 2. They are intended to be used on windows that cannot be fully opened like a small children's bedroom. The mechanism restricts the amount the sash can open up to the safety level of 100mm and re-engages once the window is closed.
Like the other types of uPVC friction hinges that are available, these hinges can be used on all types of windows and are suitable for difficult to access windows above the ground three-storey flats and those that typically require a ladder to access them. They can be combined with our selection of security enhancements such as hinge guard protection plates or dog bolts for PAS 24 performance.
It is crucial to take measurements of the hinge on your current window hinges uk to ensure that you get replacements of the same size. This can be done by looking through the image gallery of the hinge before deciding where you would like it to be. Top-hung hinges are limited on both sides and the side hung hinges are restricted only on one side.
Standard Hinge
A standard hinge is made of metal-to-metal contact and no extra parts to reduce friction. It is available in a variety of finishes, and is fire-rated. To determine the radius of your hinge put it on its flat surface and then line up with a quarter and dime in two corners. If the dime is more snug than the quarter, the corner is rounded by 1/4 inch; if the quarter fit better, it's rounded by 5/8 inch.
Selecting the right hinge can be the difference between making or breaking your door's appearance. It's important to match the style and finish of your door to the hinges to create a seamless appearance that is both functional and visually attractive.
