Sliding Patio Doors Repair
Sliding patio doors are an excellent way to take advantage of your outdoor space, but they can become difficult to open and close. This can be due to a range of issues, including dirty tracks or improperly aligned rollers.
Start by cleaning and lubricating your rollers. You can also use the adjustment holes on the lower part of the movable panel to adjust the alignment of your rollers.
Dirty or Damaged Track
A damaged or dirty track can cause a sliding door to not slide properly. Over time dirt, grit and even rust could build up, preventing the track to slide smoothly. A gentle detergent and a brush will do the trick. This job should be done regularly to ensure a smooth operation and avoid costly repairs in the future.
A door that is leaking can be a common problem. It requires immediate attention to stop water damage, structural deterioration and the growth of mold. Often the problem stems from worn weather stripping and misaligned doors, which can be fixed by replacing the weather stripping and aligning the door.
Rollers that jump off the track are another frequent issue that can be fixed with some simple DIY work. This can be a difficult task, so ask a friend to assist you. Stand inside the house, and lean the panel in front of you to reposition the rollers. After lifting the panel off the bottom track, you'll need to set it on sawhorses to prevent it from falling off. Then, loosen the screws that keep each roller in place and pry them out with a screwdriver. It is now possible to remove any dirt that has accumulated between the wheels and the tracks. Then, clean each wheel with denatured alcohol on a rug. Reposition the wheels to their tracks and then attach them again.
It is possible to straighten bent track sections with a rubber mallet, and a block of wood. If the bent portion is near hinges or has the potential to cause more damage, it's best to call in an expert.
Rollers that are misaligned
If your sliding door has problems with sliding, it is likely that the rollers are not aligned correctly. The wheels may be dirty, rusted or their bearings have worn out. This friction causes the door to catch and grind when it is opened or closed. This can also cause the sound of squeaking.
Fortunately it's an easy fix. The wheels are attached to a bracket which can be adjusted, so you don't need to take off the door. Utilize a screwdriver to find the adjustment holes on the frame (usually either side). Turn the screws to control the wheels. Rotating the screw clockwise will raise the wheel while rotating it counterclockwise will lower it. Continue to adjust the door until it is open and shuts effortlessly.
It is important to adjust the wheels prior to adjusting the latch. The latch hooks must line up with the strike plate (the opening through which the latch locks) to allow the lock to work correctly. If you don't take this step, the latch may open or close accidentally even when you're not in the room.
Sliding patio door are an investment. Making sure they are in good working order will keep your family safe. By fixing common issues such as damaged tracks, rollers or handles, you can avoid expensive repairs in the future. Contact us for more information about patio doors. We can assist you in keeping your sliding patio doors in good condition by evaluating the repairs needed. Our professionals can also assist with any replacement parts you may need.
The door frame is sagging or damaged
Sliding patio doors are a wonderful addition to any home and offer a stylish and practical alternative to swing-open or hinged doors for patios. Like other hardware items sliding patio doors are prone to become problematic in time. Fortunately, most of these issues are simple to fix with a bit of DIY know-how to repair tilt and slide patio door.
A gap in the frame is a frequent issue with sliding patio doors. This can be due to a number of factors, such as a misaligned track or rollers, a damaged track or door, or a bent frame for the door. Most of the time the reason for this problem can be easily fixed by taking the door off and reattaching the track or rolling elements. It is essential to be cautious not to harm either the frame or track.
In some cases it may be required for the entire track to be replaced. This can be done quickly and easily with an universal kit, which is available in most major hardware stores. These kits are easy to install and will have your door functioning correctly in no time.
Check your sliding door hardware and frame for signs of wear, for example loose screws or bolts. This is a straightforward and effective DIY patio maintenance step that can be done with an electric screwdriver. It is also essential to grease the tracks and rollers of your patio door to ensure smooth operation and to keep them from wearing out prematurely.
patio door repair company doors are often the primary entry point to the backyard and outdoor living space for a majority of homeowners. In order to maintain security and comfort in the home, it's important that they function properly. By taking the time to implement these easy DIY maintenance steps homeowners can extend the lifespan of their sliding patio doors and minimize costly repairs or replacements.
Handle is not working properly
Patio doors that slide open are the perfect way to access your backyard and to enter your home, but they can be difficult to operate if misaligned or damaged. A defective handle could cause the door to get stuck or be difficult to open and close. The good news is that fixing a loose handle is a relatively simple task that can be accomplished at home.
In most cases the reason for a loose grip is a result of screws that have fallen out of the backplate. To fix this issue just tighten the two screws on the inside of the handle with a screwdriver. If you find that the handle is still loose, it may be a sign that the threads are damaged and must be replaced.
A damaged latch could be the reason. This is more likely occur if the latch made of plastic instead of metal. If the latch isn't turning or catching you can try oiling it first to see if this can help. If not, you might require replacing the lock completely.
If the handle is damaged or broken, it can be difficult to use. If this happens, you'll need to replace the handle with one that is in line with the style and design of your patio doors.
Whether your patio doors are old and dated or brand new, Feldco can help you get them back on track. We have doors of high-quality in different sizes and styles that can be fitted to fit your home perfectly. For more information about our products, contact us now! We are proud to serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.
Faulty Weatherstripping
It's time to replace your weather stripping if you notice light coming from doors and windows, or feel a draft pulling at the window or door. The strips form an airtight seal that stops unwanted water, air and pests from entering your home. This helps to keep your heated and conditioned air in, thereby saving money on energy bills.
It could have lost its strong seal, bouncy, due to aging. It is easy to determine this by putting a dollar bill under the seal at the top and bottom of the jamb and door frame where they overlap. If the dollar bill slides easily between the seal and the door, it's time to replace the weather stripping.
It's tempting to cut off only the worn section of weather stripping to replace it, but this could result in cracks on the sides of the new stripping and may cause problems with the seal in the future. It is much more effective to replace the entire stripping. This will let you rest sure that your door will be properly sealed.
For an easy DIY project, follow our guide to weather stripping to take off the old weather stripping and install the right material to your sliding patio door and frame to ensure a long-lasting solid, secure seal. It's a great way to fix your door and cut your energy bill, so don't wait until it's too late. You'll reduce your expenses and enhance the look of your home.
Sliding patio doors are an excellent way to take advantage of your outdoor space, but they can become difficult to open and close. This can be due to a range of issues, including dirty tracks or improperly aligned rollers.
Start by cleaning and lubricating your rollers. You can also use the adjustment holes on the lower part of the movable panel to adjust the alignment of your rollers.
Dirty or Damaged Track
A damaged or dirty track can cause a sliding door to not slide properly. Over time dirt, grit and even rust could build up, preventing the track to slide smoothly. A gentle detergent and a brush will do the trick. This job should be done regularly to ensure a smooth operation and avoid costly repairs in the future.
A door that is leaking can be a common problem. It requires immediate attention to stop water damage, structural deterioration and the growth of mold. Often the problem stems from worn weather stripping and misaligned doors, which can be fixed by replacing the weather stripping and aligning the door.
Rollers that jump off the track are another frequent issue that can be fixed with some simple DIY work. This can be a difficult task, so ask a friend to assist you. Stand inside the house, and lean the panel in front of you to reposition the rollers. After lifting the panel off the bottom track, you'll need to set it on sawhorses to prevent it from falling off. Then, loosen the screws that keep each roller in place and pry them out with a screwdriver. It is now possible to remove any dirt that has accumulated between the wheels and the tracks. Then, clean each wheel with denatured alcohol on a rug. Reposition the wheels to their tracks and then attach them again.
It is possible to straighten bent track sections with a rubber mallet, and a block of wood. If the bent portion is near hinges or has the potential to cause more damage, it's best to call in an expert.
Rollers that are misaligned
If your sliding door has problems with sliding, it is likely that the rollers are not aligned correctly. The wheels may be dirty, rusted or their bearings have worn out. This friction causes the door to catch and grind when it is opened or closed. This can also cause the sound of squeaking.
Fortunately it's an easy fix. The wheels are attached to a bracket which can be adjusted, so you don't need to take off the door. Utilize a screwdriver to find the adjustment holes on the frame (usually either side). Turn the screws to control the wheels. Rotating the screw clockwise will raise the wheel while rotating it counterclockwise will lower it. Continue to adjust the door until it is open and shuts effortlessly.
It is important to adjust the wheels prior to adjusting the latch. The latch hooks must line up with the strike plate (the opening through which the latch locks) to allow the lock to work correctly. If you don't take this step, the latch may open or close accidentally even when you're not in the room.
Sliding patio door are an investment. Making sure they are in good working order will keep your family safe. By fixing common issues such as damaged tracks, rollers or handles, you can avoid expensive repairs in the future. Contact us for more information about patio doors. We can assist you in keeping your sliding patio doors in good condition by evaluating the repairs needed. Our professionals can also assist with any replacement parts you may need.
The door frame is sagging or damaged
Sliding patio doors are a wonderful addition to any home and offer a stylish and practical alternative to swing-open or hinged doors for patios. Like other hardware items sliding patio doors are prone to become problematic in time. Fortunately, most of these issues are simple to fix with a bit of DIY know-how to repair tilt and slide patio door.
A gap in the frame is a frequent issue with sliding patio doors. This can be due to a number of factors, such as a misaligned track or rollers, a damaged track or door, or a bent frame for the door. Most of the time the reason for this problem can be easily fixed by taking the door off and reattaching the track or rolling elements. It is essential to be cautious not to harm either the frame or track.
In some cases it may be required for the entire track to be replaced. This can be done quickly and easily with an universal kit, which is available in most major hardware stores. These kits are easy to install and will have your door functioning correctly in no time.
Check your sliding door hardware and frame for signs of wear, for example loose screws or bolts. This is a straightforward and effective DIY patio maintenance step that can be done with an electric screwdriver. It is also essential to grease the tracks and rollers of your patio door to ensure smooth operation and to keep them from wearing out prematurely.
patio door repair company doors are often the primary entry point to the backyard and outdoor living space for a majority of homeowners. In order to maintain security and comfort in the home, it's important that they function properly. By taking the time to implement these easy DIY maintenance steps homeowners can extend the lifespan of their sliding patio doors and minimize costly repairs or replacements.
Handle is not working properly
Patio doors that slide open are the perfect way to access your backyard and to enter your home, but they can be difficult to operate if misaligned or damaged. A defective handle could cause the door to get stuck or be difficult to open and close. The good news is that fixing a loose handle is a relatively simple task that can be accomplished at home.
In most cases the reason for a loose grip is a result of screws that have fallen out of the backplate. To fix this issue just tighten the two screws on the inside of the handle with a screwdriver. If you find that the handle is still loose, it may be a sign that the threads are damaged and must be replaced.
A damaged latch could be the reason. This is more likely occur if the latch made of plastic instead of metal. If the latch isn't turning or catching you can try oiling it first to see if this can help. If not, you might require replacing the lock completely.
If the handle is damaged or broken, it can be difficult to use. If this happens, you'll need to replace the handle with one that is in line with the style and design of your patio doors.
Whether your patio doors are old and dated or brand new, Feldco can help you get them back on track. We have doors of high-quality in different sizes and styles that can be fitted to fit your home perfectly. For more information about our products, contact us now! We are proud to serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.
Faulty Weatherstripping
It's time to replace your weather stripping if you notice light coming from doors and windows, or feel a draft pulling at the window or door. The strips form an airtight seal that stops unwanted water, air and pests from entering your home. This helps to keep your heated and conditioned air in, thereby saving money on energy bills.
It could have lost its strong seal, bouncy, due to aging. It is easy to determine this by putting a dollar bill under the seal at the top and bottom of the jamb and door frame where they overlap. If the dollar bill slides easily between the seal and the door, it's time to replace the weather stripping.
It's tempting to cut off only the worn section of weather stripping to replace it, but this could result in cracks on the sides of the new stripping and may cause problems with the seal in the future. It is much more effective to replace the entire stripping. This will let you rest sure that your door will be properly sealed.
For an easy DIY project, follow our guide to weather stripping to take off the old weather stripping and install the right material to your sliding patio door and frame to ensure a long-lasting solid, secure seal. It's a great way to fix your door and cut your energy bill, so don't wait until it's too late. You'll reduce your expenses and enhance the look of your home.