Choosing Upvc Window Replacement Hinges
It's not as difficult as it may appear to select and install Upvc replacement hinges for upvc windows hinges. Make sure the arrows on the hinges face the right way and determine the thickness of the hinge arms on the opening frame (13mm or 17mm).
There are many different kinds of hinges, each with its own unique features. This article will discuss the most commonly used types of uPVC window hinges, and their benefits.
Egress/Easy Clean Hinge
They are an excellent choice for replacing or upgrading the fire escape safety window, as they open at a full 90-degree angle. They can also be lowered to an 'easy clean' position so that you can easily access the exterior of your windows to clean them without climbing a ladder or lean over at potentially hazardous angles.
Yale is one of the most trusted and well-known brands in the world of home security. These hinges are compatible with any kind of uPVC side-hung windows. By pressing a small button, the window sash can be slid to the side, and then into the clean position. After closing, the sash will automatically return to its initial position.
They are available in 13mm and 17mm stack heights. Use our Egress Selection Guide to help you determine the best product for your window.
These hinges can be fitted to conventional side-hung frames made of uPVC, or aluminium. The friction screw is used to adjust the resistance. This makes opening the window more simple and reduces the chance of closing the window accidentally during severe winds. They have been tested to more than 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.
Without buttons or catches, The Nico Egress Easy Clean Friction Hinge is simple to use and provides a simple solution for emergency egress and secure cleaning. The hinge retention clip is located in the inner corner of the bottom corner. This will open the top and bottom catches and allow you to slide the sash into the easy-clean position. Once you are in the clean position close the window to reset the hinges to their original position.
Fire-Escape Hinge
Fire Escape Hinges (also called "Easy Clean") are used to replace side-opening windows for fire safety reasons. These hinges allow for a larger opening in the event of fire. This type of hinge is a legal requirement in any habitable room that has windows, as required by building regulations.
They have an exclusive friction stopper that opens the window to 90 degrees and also allows the opening sash to slide across the glass when it is open for easy cleaning of the external side of the glass without needing to use ladders. The hinges do not have buttons or catches, and operate with a simple, safe lever that can be accessed from the inside of the home.
The hinges for upvc doors are manufactured in the UK by Cotswold and come complete with a child safety limiter for day-to-day use that can be reverted with a hidden button, giving you peace of thought that your children will not accidentally open the window too far. They are available in 13mm and 17mm stack heights.
To order these hinges simply measure the length of your current side-hung window hinge that is fixed to the frame (see the article on measuring your upvc window hinges). Select the proper size hinge from the selections below.
Please note that the measurement is taken from the part that is fixed to the frame not the sash. The actual hinge length may be shorter or longer based on the manufacture of your old windows. When deciding the width of the hinge most frames made of upvc will have the 13mm stack height however if your previous window frame measures 17mm, you should select this option. You can also use the 4mm packer to compensate for the difference. All hinges are in two different directions (1 left and one right). Screws are not included in the hinges. These can be bought separately if you require. Our upvc patio door hinges window repair screws are recommended. These screws are designed to enhance the performance of your hinges and allow them to work effortlessly for a longer. They have a reduced-friction design and a heightened weather seal with a nylon reducer cap.
Restricted Hinge
There are times when a window needs to completely open, and this can be a problem with a standard hinge. These child safety friction hinges are an excellent solution to this issue. They can be used when ventilation is needed but cleaning or escape from an fire isn't possible. They function by limiting the amount of sash that can open and allowing the override of this restriction with an option. They work with both side- and top-hung windows and are available in 13mm and 17mm stack heights.
The Nico Restricted Egress Friction Hinge blends the features of a standard restrictor as well as an escape hinge to offer an efficient and easy way to comply with building regulations. It is suitable for side hung and top opening uPVC windows and comes in 17mm and 13mm stack heights. It comes in two pieces with one hinge being the one that is restricted for egress, and the other hinge being unrestricted. This lets one hinge be installed at the bottom and the other is installed on top.
These upvc window hinge replacement cost restricting hinges have been tested to BS6375 Part 2 and are designed for use on a window that isn't able to be fully opened, like a small children's bedroom. The mechanism limits the amount the sash can open up to 100mm for safety and then re-engages when the window is closed.
These uPVC friction-style hinges can be used with any type of windows. They are particularly useful for windows that are hard to reach, like those in three-storey homes or those which would require ladders. They can be complemented with our range of security enhancements such as hinge guards and protection plates, or dog bolts to provide PAS 24 performance.
When replacing a window hinge it is important to determine the length of the existing hinge so that you can get replacements that are comparable in size. This can be done by looking at the image gallery of the hinge before deciding the best place to put it. Top hung hinges are restricted on both sides, while side-hung hinges are only restricted to one side.
Standard Hinge
A standard hinge uses metal-to-metal contact and no extra parts to reduce friction. It is available in a variety of finishes, and is fire rated. For a quick way to determine the radius of your hinge put it on its flat surface and line up the quarter and dime in two corners. If the dime is more snug than the quarter, the corner is rounded by 1/4 inch; if the quarter fit better, it's rounded to 5/8 inch.
Choosing the right type of hinge can be the difference between making or breaking your door's appearance. Achieving the same design and style of your hinges to your door will create an attractive and well-integrated appearance.
It's not as difficult as it may appear to select and install Upvc replacement hinges for upvc windows hinges. Make sure the arrows on the hinges face the right way and determine the thickness of the hinge arms on the opening frame (13mm or 17mm).
There are many different kinds of hinges, each with its own unique features. This article will discuss the most commonly used types of uPVC window hinges, and their benefits.
Egress/Easy Clean Hinge
They are an excellent choice for replacing or upgrading the fire escape safety window, as they open at a full 90-degree angle. They can also be lowered to an 'easy clean' position so that you can easily access the exterior of your windows to clean them without climbing a ladder or lean over at potentially hazardous angles.
Yale is one of the most trusted and well-known brands in the world of home security. These hinges are compatible with any kind of uPVC side-hung windows. By pressing a small button, the window sash can be slid to the side, and then into the clean position. After closing, the sash will automatically return to its initial position.
They are available in 13mm and 17mm stack heights. Use our Egress Selection Guide to help you determine the best product for your window.
These hinges can be fitted to conventional side-hung frames made of uPVC, or aluminium. The friction screw is used to adjust the resistance. This makes opening the window more simple and reduces the chance of closing the window accidentally during severe winds. They have been tested to more than 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.
Without buttons or catches, The Nico Egress Easy Clean Friction Hinge is simple to use and provides a simple solution for emergency egress and secure cleaning. The hinge retention clip is located in the inner corner of the bottom corner. This will open the top and bottom catches and allow you to slide the sash into the easy-clean position. Once you are in the clean position close the window to reset the hinges to their original position.
Fire-Escape Hinge
Fire Escape Hinges (also called "Easy Clean") are used to replace side-opening windows for fire safety reasons. These hinges allow for a larger opening in the event of fire. This type of hinge is a legal requirement in any habitable room that has windows, as required by building regulations.
They have an exclusive friction stopper that opens the window to 90 degrees and also allows the opening sash to slide across the glass when it is open for easy cleaning of the external side of the glass without needing to use ladders. The hinges do not have buttons or catches, and operate with a simple, safe lever that can be accessed from the inside of the home.
The hinges for upvc doors are manufactured in the UK by Cotswold and come complete with a child safety limiter for day-to-day use that can be reverted with a hidden button, giving you peace of thought that your children will not accidentally open the window too far. They are available in 13mm and 17mm stack heights.
To order these hinges simply measure the length of your current side-hung window hinge that is fixed to the frame (see the article on measuring your upvc window hinges). Select the proper size hinge from the selections below.
Please note that the measurement is taken from the part that is fixed to the frame not the sash. The actual hinge length may be shorter or longer based on the manufacture of your old windows. When deciding the width of the hinge most frames made of upvc will have the 13mm stack height however if your previous window frame measures 17mm, you should select this option. You can also use the 4mm packer to compensate for the difference. All hinges are in two different directions (1 left and one right). Screws are not included in the hinges. These can be bought separately if you require. Our upvc patio door hinges window repair screws are recommended. These screws are designed to enhance the performance of your hinges and allow them to work effortlessly for a longer. They have a reduced-friction design and a heightened weather seal with a nylon reducer cap.
Restricted Hinge
There are times when a window needs to completely open, and this can be a problem with a standard hinge. These child safety friction hinges are an excellent solution to this issue. They can be used when ventilation is needed but cleaning or escape from an fire isn't possible. They function by limiting the amount of sash that can open and allowing the override of this restriction with an option. They work with both side- and top-hung windows and are available in 13mm and 17mm stack heights.
The Nico Restricted Egress Friction Hinge blends the features of a standard restrictor as well as an escape hinge to offer an efficient and easy way to comply with building regulations. It is suitable for side hung and top opening uPVC windows and comes in 17mm and 13mm stack heights. It comes in two pieces with one hinge being the one that is restricted for egress, and the other hinge being unrestricted. This lets one hinge be installed at the bottom and the other is installed on top.
These upvc window hinge replacement cost restricting hinges have been tested to BS6375 Part 2 and are designed for use on a window that isn't able to be fully opened, like a small children's bedroom. The mechanism limits the amount the sash can open up to 100mm for safety and then re-engages when the window is closed.
These uPVC friction-style hinges can be used with any type of windows. They are particularly useful for windows that are hard to reach, like those in three-storey homes or those which would require ladders. They can be complemented with our range of security enhancements such as hinge guards and protection plates, or dog bolts to provide PAS 24 performance.
When replacing a window hinge it is important to determine the length of the existing hinge so that you can get replacements that are comparable in size. This can be done by looking at the image gallery of the hinge before deciding the best place to put it. Top hung hinges are restricted on both sides, while side-hung hinges are only restricted to one side.
Standard Hinge
A standard hinge uses metal-to-metal contact and no extra parts to reduce friction. It is available in a variety of finishes, and is fire rated. For a quick way to determine the radius of your hinge put it on its flat surface and line up the quarter and dime in two corners. If the dime is more snug than the quarter, the corner is rounded by 1/4 inch; if the quarter fit better, it's rounded to 5/8 inch.Choosing the right type of hinge can be the difference between making or breaking your door's appearance. Achieving the same design and style of your hinges to your door will create an attractive and well-integrated appearance.
